The walls in your home may not be strong enough to support heavy objects. If you need to hang objects and have them in place for a long time without destroying the wall, then you need to fasten them on studs. In a basic wall construction, studs are spaced between 16 and 24 inches apart.
Assuming that you don’t have a stud finder, you can try locating studs manually, although this may be time consuming and inaccurate. Here are some tips that will help you locate studs without a finder.
Check Out the Wall Trim
Normally, any trim within the wall, for instance the baseboard will be connected to a stud. Look at each trim keenly to identify holes and dimples as these often represent studs. The holes may be filled with paint or cement.
Tap the Wall Softly
Use a hammer to lightly knock on the wall. If you notice an area that gives a solid sound that is slightly high instead of a hollow sound, then it has a stud.
Check Out for Switches
Most switches and electric outlets are fastened on the edge of a stud. Switch off the power and remove the cover from switches to check the screws. Once you locate the stud next to the screws, measure a 16 inches interval away from this stud to determine the location of the rest.
Use A Pin
You can drive a small nail or pin into the wall and try to locate the stud. If the pin doesn’t experiences resistance then the area does not have a stud. If it does, then there must be a stud in place.
In case you are in possession of a stud finder, it will save you lots of time and energy by helping you to detect studs in a matter of minutes. With such reasoning one cannot dispute the fact that stud finders are necessary for every household. The process is simple and involves very few steps. First you will need to determine the type of stud you have, whether magnetic or electronic and study how it works. Then calibrate the finder by putting it on a stud-free location and follow the operation instructions as outlined by the manufacturer while checking out for any signals that inform you when a stud is located. Repeat the process until you are sure that you have located all the studs on the wall.
If you don’t have a stud finding tool, and may not have all the time to locate the studs manually then you can consider hanging your objects using wall anchors. These can serve the purpose for some time as you think of a lasting solution. However you must realize that these anchors can greatly damage your wall.