As the owner of a woodworking shop, you generate a lot of wood particles using the sanding machine. For such a task, you need the right kind of air compressor to use depending on the amount of sanding you handle each hour. If you buy an air compressor that is too small, it will run out of air very fast and become useless. You then have to wait for several minutes before the pressure builds up to a level where the compressor can work. The good thing is that if you have the right sander, it will pay itself regarding saved sanding time quickly.
If you run a workshop, the air compressor from http://www.aircompressorscout.net/ will work wonders for you. If the shop is average in size, a 2-step reciprocating compressor will do the job. The rule is that you use a 5HP air compressor to power one air sander, 7.5 HP for two and 10 Hp for three sanders.
The Tank Size
When choosing an air compressor, make sure to consider the size of the tank. The smaller the tank, the more times the compressor has to switch on and off. This is tough on both the compressor pump and the motor, and the machine ends up using more energy. For peace of mind, opt for a compressor that has a tank with a minimum capacity of 60 gallons.
The Electrical Power
The energy requirement of the compressor is a huge consideration. If you stay in a location with 3-phase power, you are safe. 3-phase motors are known to use power more efficiently as compared to single-phase types. If you plan to buy a large air compressor, then it is recommended that you work on a 3-phase line.
If you don’t have a 3-phase source of power available on your premises, use an electronic or rotary-phase converter to convert whatever is available to 3-phase. Be sure to look at the amperage and voltage requirements of the air compressor before you purchase it.
You need one regulator and water trap in the line before you start using the compressor. The regulator helps you set the right air pressure for the tool to use.
Working in a woodworking shop requires the best equipment and tools to handle the various orders from customers. One of the equipment you need is the air compressor. Make sure you choose the right one for your needs and the size of the workshop.